Jack stand extention
Due to the off camber/slope of the last 2 camping spots, the ball hitch was 36" above the ground level, after the dual wheels were dug down with the axles just about touching the ground, to get the DF...
Forum Discussion
Fizz,
I wanted to get AWAY from stacking wooden blocks up to around the 18" height, I don't like/feel that it could be a safety problem with the jack leg coming off the blocks etc,(withall the traffic in and out of the TH).
I am looking for Ideas to build a Metal Pyramid type stand about 18" square, that has an adjustable center section that will extend to about 18" and then use the jack to extend the distance as required, as it was, I had to cut 2-18" tall stumps to support the front end/side stabilizer jacks, due to the slope of the campsites, etc.
Tia,
Don
I wanted to get AWAY from stacking wooden blocks up to around the 18" height, I don't like/feel that it could be a safety problem with the jack leg coming off the blocks etc,(withall the traffic in and out of the TH).
I am looking for Ideas to build a Metal Pyramid type stand about 18" square, that has an adjustable center section that will extend to about 18" and then use the jack to extend the distance as required, as it was, I had to cut 2-18" tall stumps to support the front end/side stabilizer jacks, due to the slope of the campsites, etc.
Tia,
Don
