Jeep Wrangler aftermarket bumper and bracket

Scott9413 wrote:
Is anyone aware of an aftermarket Jeep bumper that would be compatible with my Falcon II tow bar? I would like to upgrade my bumper and would like a bolt on solution for the tow bar brackets.

Scott9413,
If I recall from my days with the same tow bar as you have, you have a large, horizontal pin that can be used for connecting and disconnecting from the toad, correct? If so, my last Jeep had an aftermarket Warn bumper on it. And that bumper's "recovery" brackets (AKA "Tabs") were the correct distance apart for the pivital ends of Falcon tow bar to fit in between.

There were/are two tabs on each end of that bumper. And those two tabs had the correct internal measurement, to accept that tow bar end. Then, all that's needed is the horizontal pin, to connect and, you're done.

So, that's what you need to look for. Now, there's also the ability to purchase tow bar adapters for your Falcon tow bar, that can be bolted or welded to your bumper of choice.
Scott