Jeep Wrangler aftermarket bumper and bracket
Is anyone aware of an aftermarket Jeep bumper that would be compatible with my Falcon II tow bar? I would like to upgrade my bumper and would like a bolt on solution for the tow bar brackets.
Forum Discussion
Off Pavement wrote:
I'm not sure about the Falcon 2, but from pictures I see of it, it looks like it would work well with a basic tow bar adaptor for the D-ring recovery mounts available on many aftermarket bumpers.
I use this Blue Ox adaptor with my Adventa II tow bar and Metalcloak "Framebuilt" model bumper. LoD is another aftermarket supplier that will custom weld tow tabs as well...
Yep,
Those are the most common type of tow bar adapters, for aftermarket Jeep bumpers, with SINGLE recovery tabs, on each side. As you see, it's the same ones I use. But the OPs tow bar, utilizes a different end and cannot use those. The Falcon Roadmaster utilizes a totally different attachment system. If you look at the Roadmaster shown below, you'll see the type of connection needed. Also, if you look at picture of our last Jeep, you'll see the type of recovery tabs needed for the OPs bumper to have, in order to utilize his Falcon tow bar.
If he had that, he could simply insert his center section, in between the two recovery tabs, on each side and, run the pin through it, DONE.
