Forum Discussion

Stclairm's avatar
Stclairm
Explorer
May 03, 2013

Just hooked up my Equal-i-zer hitch to my new F150

My measurements unloaded in the front were 38 LF 37 3/4 RF. Rears were 39.5. Loaded: LF 38 1/8, RF 38, LR 38 RR 37 7/8. The installation video says you want the fronts as close to the unloaded meas...
Ron_Gratz's avatar
Ron_Gratz
Explorer
May 03, 2013
After application of WD, you're a little bit higher in front and about 1.5" lower in back.

That's a pretty typical result and should work well.

FYI, Ford now says you only need to eliminate about 50% of the front-end rise.

To really know where you stand, it would be good to weigh the loaded combo to compare with the TV's GVWR and the rear GAWR.

Ron

About RV Tips & Tricks

Looking for advice before your next adventure? Look no further.25,104 PostsLatest Activity: Jan 24, 2025