Laarning lots- what else do I need?
I have a Jayco Eagle class C- setting her up for towing a 2014 Honda CR-V. Read lots here- and am going with the ReadyBrute Elite tow bar and a Blue Ox baseplate. Can you tell me what else I need to o...
Forum Discussion
kaffi311 wrote:
Thanks all. Now just a little confused about lights. Taillight or diode. Which is better ?
IMO, there is no "better" or "best". There is only personal preference.
I always had the towing wire harness on my Jeeps installed with a 4 pin flat connector next to or behind the driver's seat. I simply unplugged the vehicle wire harness and plugged it to the towing harness.
I once had a Datsun pickup that I installed a selector switch in the dash. It had a guard on it so that with the guard down, the switch was in the "normal" position; with the guard up, and the switch flipped, the lights were connected to the towing harness.
I have never used diodes or installing extra bulbs in the taillights.
