Led Lights
Looking to upgrade the lights in my toyhauler. Who uses what bulbs and how to choose whats right? Most of my bulbs now are 921"s
Forum Discussion
den06 wrote:
Upgrading our lighting to LED bulbs. Have most of them installed. Trying to replace the RG 1141 bulbs. Was asked the polarity because they have 2 polarities for this bulb. I told her that all I knew was that the Denali TT 2006 was negatively ground. Can some one explain this to me. I know if the light doesn't light the first time I install the bulb, that I should flip it over and it should work. Is there something else I should look for? Sort of new at this.
My MH used a lot of 1141 bulbs. I have replaced them all with LEDs. Only one socket was wired with the positive and negative wires switched. I switched the wires so the positive was on the single contact and all was well.
If the bulb doesn't light check the polarity with your multimeter and reconnect the wires if the center contact isn't positive. Oh, you don't have a multimeter, then just switch the wires and see if it works. You might try another bulb just to make sure it isn't a bad bulb.
