Lippert StrapTek WD setup

Thought I'd rejuvinate this old topic.

I bought a set of StrapTek brackets last month when my Reese Snap-Up bracket bent and fell off my TT. I have Reese cam sway control and after getting here and looking I see I'm not the only one.

I like StrapTek just up front because the frame bracket has 2 set screws and is a little narrower than the generic sized Reese brackets. So hopefully no more bracket failures!

Plus the price was reasonable... meaning not cheap but I didn't choke. I paid $170 and the local RV store in ND where my bracket failed wanted $65 for a non-reese snap-up bracket.

Who else has tried these?

It looks like a different way to accomplish the same end results. I can see the straps would be less noise than a chain set up. You would need to find a way to mark the straps so that you re-tensioned them to the same tension every time.

The chains will allow returning to the same setting by simply counting links. The chains would be less likely to wear.

From my years with a travel trailer, I found the old and proven Reese Dual Cam Straightline worked very well.

Like others have noted, the name Lippert is a turn off to me.

Ken...retired mechanical engineer.

Could be a good product and I can see the advantages, but this quote by the "product developer" made me chuckle:

"Like other RVers out there, hooking up my weight distribution system made me anxious,” said Product Developer Dave Gramlin. “I was tired of dealing with noisy, cumbersome and potentially dangerous chain systems that sometimes left me with bruises.

Bruises??

In 9 years of using the chain system, I was never anxious and never got a bruise. Simple to do if you know how. Some apparently don't.

From a marketing perspective, this looks like a very good idea if you can convert thousands of the old chain systems.

Fatigue factor far greater with plastic fibers than metal...have been others that Iv'e seen on this forum hawking either this or another product that do the same as steel chain, think I would stick with the latter.

TXiceman wrote:
It looks like a different way to accomplish the same end results. I can see the straps would be less noise than a chain set up. You would need to find a way to mark the straps so that you re-tensioned them to the same tension every time.

The chains will allow returning to the same setting by simply counting links. The chains would be less likely to wear.

From my years with a travel trailer, I found the old and proven Reese Dual Cam Straightline worked very well.

I don't notice them to be quieter, since most of my noise comes from the cams.

Yes, I just mark my spot and set it as close as I can, then before getting under way I find a straight flat spot and do a quick check to make sure the cams are sitting on the spring bars equally.

One benefit I've seen is the ability to fine tune the chain length (or here strap length.)
I saw one post where someone complained that after setting up their hitch, when they burned down their 60 gallons (dual tanks) the setup was no longer perfect and there was no way to adjust the chains.

I don't really have that problem with my 25 gal tank, but I could certainly see how loading my rig differently (say for a weekend vs a week or more) could change my TW by up to a couple hundred pounds, and of course that would certainly lead me to tighten the strap a click or two.

Seems like it could work. Watch the videos in the link. This is from the Lippert web site. This answers some questions from other post.

http://lci1.com/straptek

My chains won't ever rot in the sun nor stretch from snapping up. I just checked on my ladder tree stand before deer season kicks in and two of my straps tore when I went to adjust them. I'll stick with metal in critical applications, thanks.

And I'm no fan of the Lippert name either. Seen their work.

Hey VegasScotty, With the straptek there is no need to use the cams. Get the strap ring raised as high as you can, up to the bottom of the winch, and it will control the sway. The first time I tried it I admit was a little scary. Set it up and hit the road. I have been using mine all summer with no alturnative sway control. I think you'll be impressed!
I forgot to mention, there is two u-bolt holes in your spring bars. Take your u-bolts out of your current hangers and use them to mount your strap directly to the spring bars,take the cams clear off.

past history of there frames leave doubt for me. New Idea is great, will wait for proof in time and use.

As a former flatbed driver I can attest that straps lasted years being used all day everyday. These should easily outlast the camper. I don't have the snap up brackets on mine, just hooks for the chains so I have to raise and lower the trailer/ TV at least twice to hook up, sometimes more if I'm not on a level site and I run out of up or down on the jack.

Before I go camping again I am going to get some of these. I'll let you know what I think. It seems too simple not to work.