Looking for a HHR fuse adapter
We flat tow a HHR. Anyone else towing one knows you have to pull a fuse from the lower passengers side fuse panel. I've been told there is some type of adapter to replace the fuse with some type of sw...
Forum Discussion
Just make your own.
1. Take an old fuse and remove the prongs from it.
2. Solder wires on these prongs.
3. Buy a fuse holder and switch from an auto parts store/Walmart etc. (less than $5 for both.)
4. Solder one of the prong wires to the fuse holder.
5. Solder the other prong wire to the switch.
6. Solder the final wire from the fuse holder to the switch.
7. Install switch, put fuse in fuse holder and button up the fuse panel.
Look closely and you can see the switch mounted on the plastic panel...Dennis
1. Take an old fuse and remove the prongs from it.
2. Solder wires on these prongs.
3. Buy a fuse holder and switch from an auto parts store/Walmart etc. (less than $5 for both.)
4. Solder one of the prong wires to the fuse holder.
5. Solder the other prong wire to the switch.
6. Solder the final wire from the fuse holder to the switch.
7. Install switch, put fuse in fuse holder and button up the fuse panel.
Look closely and you can see the switch mounted on the plastic panel...Dennis
