Low clearance - cut this off?
The structure in my photo extends very low under my hitch. It is so low, it drags on most driveway entrances and exits. Other than making the hitch less adjustable for another rig in the future, is ...
Forum Discussion
Yes you can trim it down a bit. But make sure you're only trimming the part that's in free air. I wouldn't cut anything that is between the clamped pieces.
If you want to avoid cutting you could try disassembling the hitch and flipping that part over. But my guess is then it will stick up too high and interfere with the tailgate opening.
If you want to avoid cutting you could try disassembling the hitch and flipping that part over. But my guess is then it will stick up too high and interfere with the tailgate opening.
