Ndr1292
Fridge died, dometic ndr 1292, troubleshot it, no 12vdc poser outta board, suspect , replace board, follow directions to the letter, still no lights lit at the fridge control panel. I am so over this, anybody got a good idea, I am
Forum Discussion
6 Replies
- Ok, 3 weeks ago after much thought, I removed it, and that was hell on earth, ended up using the sawzall, and install a residential . I framed it all in using mostly custom cut oak, my driveway looked like a cabinet shop, but its in, and I got some more storage. I wished I had taken pictures of the process, but I didn't have enough patience for that.
I really appreciate the input from ya'll, troubleshooting taught me more about my rig. - No 12V DC to control board...then you need to find and check main feeder fuse12V DC comes directly form DC Dist Panel (fused circuit) to fridge terminal connector on backside of fridge then directly to control board
If you have 12V DC at terminal connector then need to check 3A fuse on circuit board (DC Control Fuse) - Never mind
- Model number on fridge
- Where'd you get the ndr?
- I am very frustrated with this fridge, the check light came on for a bit before it finally died.
