New Andersen WD hitch
A fellow camper bud showed me this. It's new and different. Anyone using one? Andersen WD hitches A U-tube video with the factory guy explaining it. You have to get past MR Truck doing his...
Forum Discussion
KKapa wrote:Mike E. wrote:renojack wrote:
Directions call for 100 lbs on the bracket bolts and 3 turns after contact on the setscrews. Just dropped it off at the shop for the weld option-2 inches on the trai;ing edge at the bottom of the outside bracket.
My instructions state 150 ft/lbs on the bracket bolts.
Ours say 100 too
My instructions are 100 on the frame bolts and "around" 150 on the receiver/ball bolts. I think we are all on the same set.
I had mine welded yestersday and the welder, who has also installed some others elected to weld 2" on the upper and lower outside trailing edge and the lower leading edge of the outside brackets. They are not going ANY place and I have more peace of mind. Operating as advertised. While only in town so far the biggest feature that I have taken advange of is the turning and backing radius compared to the friction slide bar sway control limitation.
