New Equal-I-Zer Hitch Issue
Received my new 10k Equali-i-zer hitch yesterday and started the install today. Ran into a glitch right off the bat. I ordered both the hitch and ball at the same time, from the same place and receive...
Forum Discussion
I know you got it tightened but if anyone else runs into this problem here was my solution. I took off the socket bolts and moved the sockets over a bit (using the bar) so they were out the way. An 8 buck 1 and 7/8 inch socket fits just fine with the hitch head sockets out of the way.
