New Shank for 2021 GMC Sierra 2500HD
Hello, I recently upgraded to a 3/4 ton truck and it has the 2.5" receiver. I didn't want to mess around with the adapter so I picked up a Reese Titan shank however it doesn't fit correctly. So m...
Forum Discussion
So in hindsight I see I just said it didn't work and didn't state why. On the part of the shank that goes into the receiver it starts at the 2.5" but then there is a small ridge and it expands just a little where it would normally be sticking out of the receiver but the problem I'm running into is that I'm coming up maybe an 1/8" short of being able to put the hitch pin in because the expansion on the shank hits the receiver and won't let it go in far enough.
I may be able to go with a shorter shank and still be ok with the jack because I do have some room to spare when the tailgate is down so maybe I need to look at that closer to see if I can find a shorter extension on the shank that will fit.
I may be able to go with a shorter shank and still be ok with the jack because I do have some room to spare when the tailgate is down so maybe I need to look at that closer to see if I can find a shorter extension on the shank that will fit.
