New WD Hitch Needed- Reese DC or SC?
We are very seriously considering upgrading to a new trailer, a Jayco 32BHDS. Listed dry tw is ~900lbs, so I am figuring after propane and battery, close to 1200lbs + what is loaded in the trailer, so...
Forum Discussion
Kevinwa wrote:
I set the hitch as per the instructions. Without it the back of the truck drops down and the front fenders lift 1". With the WD hitch on the truck sags 1/2" at all four corners.
My understanding is that the typical case is to bring the front to zero or slightly raised from the no bars height.
If I'm correct then fixing this **might** also address the issue with the snap up pipe too. If the tongue is raised a couple of inches from ride height you should be able to at least start the snap-up by hand so that the ground is not interfering with the pipe.
