Nut backed off ball caused accident
I was heading up to santa cruz ca. in my 40' american eagle I had my motorcycle in tow on a utility trailer. Before I left I had tighten the nut on the ball with an air impact driver the kind that you...
Forum Discussion
There is really no reason for lock washers or Loctite or welding or cotter pin or smashing threads or any of that at all.
It real simple. Tighten it up to torque spec and you will have no problems with any nut backing off. If you don't have to tools to do this(most don't)then please have a shop do this for you.
If you don't get the fastener to torque spec you can have other problems that you don't want.
It real simple. Tighten it up to torque spec and you will have no problems with any nut backing off. If you don't have to tools to do this(most don't)then please have a shop do this for you.
If you don't get the fastener to torque spec you can have other problems that you don't want.
