KirkJB wrote:
This is a weight distribution hitch question. I have a 2017 Starcraft 19BHS that I tow with my 2016 Toyota Highlander. I also have a 2008 Nissan Frontier that I would like to use once in a while to tow the trailer. The trailer is well within the towing capacity of both vehicles. I am using a e2 trunion weight distribution hitch that has been set up for the Highlander as the tow vehicle. I am wondering if I need to change the hitch to use the Nissan Frontier as the tow vehicle. I measured the distance from the ground to the bottom of the hitch receiver, and the Frontier sits one inch higher than the Highlander. Will this make much difference in how it tows? Thanks in advance for any input.
Being a little lower than it should be (level) is fine, getting higher leads to more problems the higher it gets. If one inch results in an noticable problem on your setup then you have a fundamental? problem, I'd say don't sweat it after trying it out carefully just to be sure.