Outside stereo speakers
I have a Magnadyne LS-6000 with A/B switch, yes, I know it is ancient. (cassette player) It has an external CD 3.5mm connection & I wanted to use that connection for both my iPod & portable CD play...
Forum Discussion
westend wrote:keymastr wrote:
A large part of your problem is that you tapped in to a circuit that already had 4 4 ohm speakers attached making a 2 ohm load to the amp. When you added 2 more speakers you have now lowered that 2ohm load to something under 2 ohms and there is no way that your amp is stable for those loads. Either put those on their own circuit or put a switch in line to switch between indoor and outdoor speakers.
X2
Downstream from the "tapped" connections, I installed disconnects on the positive side only going to the "A' speakers inside the TT & have them disconnected, when running the outside speakers. Does this make any difference in what you've indicated ?
