Patching Coroplast
Our 5th has coroplast covering the bottom of it. The factory cut a 8 - 10 inch slit in it to route a power cable thru it. The original tape job fell off after about a year, and now after 2 or 3 redos ...
Forum Discussion
StirCrazy wrote:CarnationSailor wrote:
And the winner is........zip ties!
They closed it up nicely and I didn't have to bother with cleaning off the old adhesive first!
Thanks to everyone for all the suggestions.
what did you use to seal up the crack so water doesnt get in?
Steve
It's too far from the tires for them to throw water up it, and any other incidental water that might splash up will not likely get thru the joint because the two edges are tight against each other. It would be necessary to seal it if water could accumulate on the surface, but it can't.
