Protecting absorption refrigerators PCB
The last few years during the storm season I've been having issues with my refrigerator (Norcold N641) not working temporarily. At first I thought there was something wrong with the PCB as the frig...
Forum Discussion
I think your problem as you described it is more with the wire harness connections rather than the soldered components on the board it self. I have always used an eraser to clean that green corrosion off of my terminals. I had a similar problem on my connector and cleaned it this way. The only green stuff I see from your pictures is right above the 16 pin connector. I am assuming they were taken after you cleaned the board. Was that green stuff over the whole board or just were we see it now?
