PULLRITE SLIDER HITCH MAINTENANCE
I currently have a Pullrite 18K ISR installed on my rig. My question is what do you guys use that is effective and safe to remove old material from the way tubes? The way tubes on my hitch are pretty ...
Forum Discussion
JIMNLIN wrote:
I would check with Pullrite as they have indicated lube types and maintenance depends on year models.
I will add that if you don't follow their recommendations they may not warranty their product too. Been there done that. When I bought mine they recommended using a silicone lubricant (goop) as I recall now, but some where along the way they switched to Slip Plate. Of course there was not official correspondence about that, just in their newsletter. Long story, but follow their recommendation on what to use.
