Question about trailer brakes
My brake coils on a Dexter 3500 pound axle are not wearing flat. There is a ridge at the bottom of the coil as if that portion of the coil is beyond the armature on the hub and isn't seeing the wear ...
Forum Discussion
CampCritter wrote:ScottG wrote:
That's just the area that runs against the drum. Your magnets wear dots are gone so it's time to replace them.
Thank you! I was wondering about those holes. The Dexter manual says that, "the magnets should by replaced if any part of the magnet coil has become visible through the friction material facing of the magnet." It doesn't mention the dots at all.
:) Glad to help!
S
