Question about trailer brakes
My brake coils on a Dexter 3500 pound axle are not wearing flat. There is a ridge at the bottom of the coil as if that portion of the coil is beyond the armature on the hub and isn't seeing the wear ...
Forum Discussion
$1750 in parts in Oct., 2013. I also don't like hoses so I made my own hard lines. My steps are right between the axles and the batteries so that's where I put the actuator... it just fit. On a heavy rv like this, I would do it again in a flash. I have an e brake and drive very politely but there's always some a-hole that makes you do a panic brake test and my 5er used to stop like a loaded freight train! I've tried everything under the sun to make drums work well. on my previous heavy rv, and I wasn't going to waste the time and $$ again. Again, if yours stops well with drums... no need to spend so much money on discs. Craig
