Question for Tire EXPERTS
Looking for facts - not guesses. In the event of a flat tire, What are the ramifications of using a same spec tire of a different brand but that has an outer diameter up to 1/2 " less than the origin...
Forum Discussion
I'm no expert. But your owners manual might specifically state it. Good place to start.
Here's what mine says.
Replacement tires on any axle, must be of the same manufacturer. The
brand, model, size, and load range and must have a load rated carrying capacity equal to or greater than the original equipment tires.
Mixing tires on any axle of a different brand, model, size, load rating and load range can cause unusual handling and uneven braking due to different traction coef cient and could result in sudden tire failure or loss of control due to non-symmetrical handling.
That tire isn't that big why not just carry a spare if this is your concern in an emergency.
Here's what mine says.
Replacement tires on any axle, must be of the same manufacturer. The
brand, model, size, and load range and must have a load rated carrying capacity equal to or greater than the original equipment tires.
Mixing tires on any axle of a different brand, model, size, load rating and load range can cause unusual handling and uneven braking due to different traction coef cient and could result in sudden tire failure or loss of control due to non-symmetrical handling.
That tire isn't that big why not just carry a spare if this is your concern in an emergency.
