Reese WD head clarification
Hey Guys I have a Reese weight distributing hitch with trunnion bars along with dual cam setup. It was purchased in 2010 may but wether it was made in that era is unknown. It came with 1200/12000 b...
Forum Discussion
Install and uninstall instructions, don't get hit in the nuts by the bar... Check
Bags may be in the future and needed with my varrying tounge weights, but we can touch on that if the time comes...
Make the front come up 1/8" to 1/4" check ill aim fr just shy of 1/4" and ill get back to you with scale weights
One more thing on your setup with the jack/hand/jack stand in your picture it's not level like it will be in the reviever of the truck, yes I can use a jack stand and have it on a 30 degree angle or so you are showing off horizontal plane, will this not effect the placement of the snap up and dual cam mounts vs perfectly horizontal plane more so how it's mounted in the truck?
Bags may be in the future and needed with my varrying tounge weights, but we can touch on that if the time comes...
Make the front come up 1/8" to 1/4" check ill aim fr just shy of 1/4" and ill get back to you with scale weights
One more thing on your setup with the jack/hand/jack stand in your picture it's not level like it will be in the reviever of the truck, yes I can use a jack stand and have it on a 30 degree angle or so you are showing off horizontal plane, will this not effect the placement of the snap up and dual cam mounts vs perfectly horizontal plane more so how it's mounted in the truck?
