Reese 20k for RAM oem hitch prep

pressure_welder wrote:

Bigfoot affair wrote:

pressure_welder wrote:
Well finally was able to hook up the fiver to the new RAM for the first time, being that the B&W was on the lowest setting I had to make a pinbox adjustment to bring the nose down as much as possible, its not perfectly level but its not too bad either. 8-1/4" at the bedrail to front of the cap, and 7-3/4" at the tailgate. The fact that the box is shallower on the RAM compared to my GMC drastically helped my situation!

Hook up was a breeze with the B&W however it is a little different feeling with the cam jaw system, I am definatly used to hearing the nice "CLICK" when the king pin engages the jaws. Very quiet hitch to use which I noticed soon. Iam not too sure if it is my suspension on the truck making noise OR the pistons on the hitch head but I am getting a slight squeeking. Not horribly noticeable though. About the only complaint I have is B&W not making the locking pin holes on the feet big enough for a decent pad lock. I plan on drilling one out slightly, along with one of the pins on the hitch head for pad locks.

As for the first RAM towing experience (this is comparing to my 15 GMC), I took the fiver for about a 45min highway spin on the way to the dealer for some warrenty work. I noticed right away the Aisin felt strong and very similar to my Allison, shifting was on point. I was pleasantly surprised with the low end torque while getting going from a stop it was definatly more abundant. We have quite a steep grade to climb which is about 2 miles long almost directly off of our acreage so this was a good test, and it felt like the cummins loved every minute of it, I would say it nudged out the 15 duramax slightly on the hill climb. Crusing down the highway loaded I would say both trucks are quite comparable for ride comfort. Now I am a massive user of exhaust brakes while towing, I love them and always have, this RAM completely and utterly destroys my 2012 and 2015 duramax in this department, holy **** is the exhaust brake ever effective, sections of hill where ive had to apply additional brake with the duramax, ive actually had to apply acceleration disengage the RAMS exhaust brake to maintain speed, I am going to love this even more when the 5000LB boat is hooked up too. I must also note that I have the brakes set on Heavy elec and started with the gain on 6.0, I was happy with the brake test, however upon driving I noticed the camper was a little aggressive so I ended up down to 4.5 which seemed perfect. I will admit I am not as heavy as most with the fiver at 11,500 so these numbers may be skewed for those of you with heavier units, although I will be up around 16,500LBs with the boat/camper hooked up so I may have to make additional adjustments. But at this point I will admit I am happy with the brake controllers operations.

ha long story short, I am excited put more miles on with the RAM and B&W

Completely opposite from what their experience was... Clicky

I would say they are doing a slightly different style of towing as myself. Just commenting on what I have experienced thus far. Kind of funny that even the 2016 gmc dually barely made the list due to it almost being off by 10,000lbs towing capacity. Either way I still love both trucks.