Reese Dual Cam HP frame brackets
Ordered a new set and it’s new stock. Install instructions are revT 2017. This kit has the rivenuts in it. Holding the frame brackets onto my frame and they do not appear to bent to the full 90 (I...
Forum Discussion
John's advice is spot on. I also have about 1500lbs on my tongue. During intial setup first thing I did was put LARGE labels on the bars, Drivers side, Passenger side. My cams have worn like John's, I now have about 30K miles on the system, works well.
Since my frame it tube, I made a plate from 3/16" steel that fits inside the tube, slides down to line up with the bolts and has nuts welded to the plate. No rivnuts etc., just the bolts into the nuts welded on the plate and sandwiching the whole system.
Since my frame it tube, I made a plate from 3/16" steel that fits inside the tube, slides down to line up with the bolts and has nuts welded to the plate. No rivnuts etc., just the bolts into the nuts welded on the plate and sandwiching the whole system.
