Reese head loose on shank
I have a Reese Titan shank and the trunion style head. When the bolts are as tight as I can possible get them the head is still loose on the shank. I see it calls for 300 lbs torque. Can the cast head...
Forum Discussion
Lynnmor wrote:Hannibal wrote:
I talked with a technician at Reese a few years ago. He said the shim is only necessary if the rattle when unloaded is bothersome. I put one shim in and no rattle.
I guess anyone can be called a "technician" nowadays.
Can you prove him wrong? The shank has a little slop in the receiver as well with one 5/8” pin keeping it in there. Non issue.
