Schwintek (Lippert) Slideout Motors
I have one Schwintek slide that's always been slow or hesitant, and has been repaired more than once, and now has yet another bad motor. Does anyone know if the existing 300:1 motors can be replaced b...
Forum Discussion
Camper445 wrote:
If the system was not installed correctly as in correct tolerances, squareness, size of opening etc, it's probably going to be problematic no matter what motor. That is the case more often than not, as the builders all suck and care less about having any QC or QA. Slap it together, push it out the door and let dealer and buyer deal with it. Lipptrt customer support? Now that's an oxymoron. roflmao.
I'm thinking the same thing. While it would be nice to have motors with more torque, if the slide is not currently operating correctly, and has some alignment problems, putting more force on it may produce untoward affects.
I'm wondering if anyone has tried the Schwintek type motors on amazon that are lower in cost:
https://www.amazon.com/236575-Wall-Slide-Out-Motor-Assembly/dp/B09DPCGTT9/ref=sr_1_4?crid=DVWURBI1REEB&keywords=schwinntek%2Bslide%2Bmotor&qid=1654275052&sprefix=schwingtek%2Bslide%2Bmotors%2Caps%2C91&sr=8-4&th=1
