Boomerweps wrote:
While I have what most would consider a short trailer 21' tip to stern, I had similar concerns with my driveway onto the highway from the crown of the road and driveway and the gutter dip. Better clearance pulling in than out. I recently had my axle underslung on the springs from over. Just that gained me 5&1/4" clearance (best I can measure). But before that I did not install my WDH spring bars until after leaving my driveway to keep the TV to TT better able to pivot at that dip. Do you back in with the WDH spring bars connected?
Might be worth a try. I use the BlueOx sway pro and typically do not disconnect for backing in so maybe I will try this first as this would be the easiest option if it works.
Regarding the casters, after reading about this in earlier post I noticed E-Trailer actually sells something specifically for this https://www.etrailer.com/Skid-Wheels/Ultra-Fab-Products/UF48-979013.html but it sounds like a few of you have concerns with this due to potential frame twist.
Great stuff all! Thanks again!