Sway bars for a Wolf Pup?
I have a F150 eco boost Ford. I am think about getting a 16bhs Wolf Pup. Do I need sway bars? What type? Any advice is appreciated.
Forum Discussion
smsmith,
About 5 years ago the sway bar I used on my Springdale TT died. (yes, they can die). I bought a new one and because the hardware attachments were already on my camper and hitch head (those round balls), I did not need to install them again. I put them away in a drawer.
Fast forward a couple years later, we traded the Springdale for our current Outback (Walnut Ridge RV sales near New Castle,IN). At that time I switched and got an Equal-i-zer weight distribution system that had the sway control built in. I did not need the friction sway bar any more. I kept the bar and stuffed it away in my utility shed where it's been sitting for the last 5 years or so.
I just went out to the shed and found it. I also found the hardware for it (never opened).
If you are interested in this, I will give it to you. It's yours if you can use it.
I see in your profile you are from Indiana. Well, depending upon where you are at, maybe we could meet somewhere and I can give it to you.
I live (as shown in the left), between Lapel, Anderson, and Pendleton, Indiana (yes, in the country). What do you say?
If interested, use the Private Message on these forums and we can swap information how to meet up somewhere.
I'm always glad to help newer RVers by passing on my discarded items I'll never use again. I've given a lot of things away over the years. If interested, Private Message (PM) me.
About 5 years ago the sway bar I used on my Springdale TT died. (yes, they can die). I bought a new one and because the hardware attachments were already on my camper and hitch head (those round balls), I did not need to install them again. I put them away in a drawer.
Fast forward a couple years later, we traded the Springdale for our current Outback (Walnut Ridge RV sales near New Castle,IN). At that time I switched and got an Equal-i-zer weight distribution system that had the sway control built in. I did not need the friction sway bar any more. I kept the bar and stuffed it away in my utility shed where it's been sitting for the last 5 years or so.
I just went out to the shed and found it. I also found the hardware for it (never opened).
If you are interested in this, I will give it to you. It's yours if you can use it.
I see in your profile you are from Indiana. Well, depending upon where you are at, maybe we could meet somewhere and I can give it to you.
I live (as shown in the left), between Lapel, Anderson, and Pendleton, Indiana (yes, in the country). What do you say?
If interested, use the Private Message on these forums and we can swap information how to meet up somewhere.
I'm always glad to help newer RVers by passing on my discarded items I'll never use again. I've given a lot of things away over the years. If interested, Private Message (PM) me.
