Forum Discussion
Lynnmor
Apr 22, 2018Explorer
Unless the vehicle has a useable hydraulic pressure sensor, the DirecLink is probably using the wheel speed sensors to detect the need and amount of braking. Again, the consumer should be informed about how it works. If you are contemplating buying one, you might want to find that pressure sensor and then ask if it is the reference device. Some trucks have a simple on-off switch to detect brake pedal position for the ABS and a pressure sensor imbedded in the ABS valving. I have no clue if those can deliver any meaningful information to the brake controller, or if they are even read.
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,108 PostsLatest Activity: Feb 01, 2025