Forum Discussion
thestoloffs
May 18, 2016Explorer
We use brass quick disconnect fittings between each of our fresh water system components (Y connector @ hose bib, white hose ends, filter, & 90 degree connector @ fresh water intake).
All our 30A power cord connectors have Coil n Wrap Plug Dogs handles for ease of removal.
We also use their coax quick disconnects for the cable TV connection, on those rare occasions where we find such services these days.
We swapped out our Marinco shore power connector & cord with a SmartPlug system. Much easier to plug in and gain a positive connection.
Finally, for the sewer connection, we ordered our coach with a built-in Thetford Sani-con macerator. DW can manage 2 21' lengths of retractable 1" hose from her scooter, rather than a single 3" hose.
NOTE: These are merely the products we've used; this is not meant as a commercial endorsement.
All our 30A power cord connectors have Coil n Wrap Plug Dogs handles for ease of removal.
We also use their coax quick disconnects for the cable TV connection, on those rare occasions where we find such services these days.
We swapped out our Marinco shore power connector & cord with a SmartPlug system. Much easier to plug in and gain a positive connection.
Finally, for the sewer connection, we ordered our coach with a built-in Thetford Sani-con macerator. DW can manage 2 21' lengths of retractable 1" hose from her scooter, rather than a single 3" hose.
NOTE: These are merely the products we've used; this is not meant as a commercial endorsement.
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,174 PostsLatest Activity: Oct 30, 2025