DavidP wrote:
Most likely a bad switch. Very common. They will send you a new one for free or at least they did for me. Also make sure it has a good ground on the base connected to the trailer. The fact the light works most likely it does.
Yeah, light works just fine and the ground seems to be solid.
Popped the housing off, and all the gears seem to be intact.
Although, the bigger gear in the back, attached to the actual spindle that runs up and down, I can pull it up just a little bit. There is some play in it, but it doesn't spin freely, which leads me to believe that nothing is sheared/broken.
I have a email into Barker, ill see what they say.
Thanks for all the input everyone.
Stay tuned.