Torque Multiplier Lug Wrench
Anyone ever use (or see) one of these? I just stumbled across it on the internet. I've never seen or used one. EZ Lug Wrench Torque Multiplier: http://ezlugwrench.com/
Forum Discussion
reluyog wrote:
I carry a conventional torque multiplier and a 3/4" drive torque wrench, but haven't had to use it yet. Previously used a 3/4" breaker bar with a five foot cheater pipe. I'm hoping the multiplier is less work.
Your setup will work great but check your multiplier on the input side as many in your size are 1/2" drive input and 3/4" drive on the output. As I understand your post I am reading it as 3/4" drive on the input side. I use a Proto 6:1 multiplier and it is 1/2" drive on the input side and 3/4" on the output side.
