Towbar repair

harold1946 wrote:
Not difficult at all. Contact Roadmaster for a rebuild kit, the instructions are exelent

It might be different story for a 14 year old tow bar. Our Sterling (predecessor to the Sterling All Terrain) is only 8 years old and it's already hard to find parts for it. I called Roadmaster last year looking for a rebuild kit. I had to supply the serial number so they could see if they still stocked parts. Luckily it was the last generation of that model and parts were still available. I was told however that when the current parts supply ran out that was the end. They have no plans to manufacture any more parts for this model.

I have a Falcon 2 and completely rebuilt it a few years ago - even had all the metal parts re-powder coated. Also had them send me new decals. Not hard at all.

Here it is after reassembled...

Not difficult at all. Contact Roadmaster for a rebuild kit, the instructions are exelent

Check their website and see if they are going to be at any rally near you. Had ours serviced by the factory team at the Quartzsite RV show a couple of years ago. Free if all it needs is service, a small charge if they have to rebuild it.........