trailer questions/concerns
i have not done a ton of hauling/trailering and always got a little nervous when pulling something and so had some questions about a new project of mine. i have a little utility trailer and wanted to ...
Forum Discussion
If you mean relocating the axle tubes so they are above the springs...flipping the axles.
Springs on top of axles can be relocated so the springs are under the axles.
You would need to weld new spring perches on the bottom of axles so springs can be mounted properly.
You do NOT flip the axles over..you just relocate the springs....so that the bend in axle tubes is still bowed up.
Relocating the springs under the axle tubes will lower the trailer.
Many new trailers come that way and they are heavier than you utility trailer.
Springs on top of axles can be relocated so the springs are under the axles.
You would need to weld new spring perches on the bottom of axles so springs can be mounted properly.
You do NOT flip the axles over..you just relocate the springs....so that the bend in axle tubes is still bowed up.
Relocating the springs under the axle tubes will lower the trailer.
Many new trailers come that way and they are heavier than you utility trailer.
