Using a 2.5" to 2" reducer with WD Hitch
So the new TV I just bought has a Class V hitch (2.5" receiver), and my WD hitch is for Class IV (2"). I decided to buy a reducer for $12 from Amazon. Part came in today and it says Warning: Do not...
Forum Discussion
This is what I use for a reducer sleeve. A 12" weldable receiver tube. It fits right in my 2.5" receiver perfectly, and supports the shank along its entire length. No more slop than what you'd get out of the 2" shank in a 2" receiver.
The original hole was half a hole off, so I turned it 90 degrees, marked for new holes, and drilled them in the right place. Extra holes are irrelevant because it's not structural.
