Using foam in a can to fill gaps
Has anyone used the "canned" spray foam to fill in gaps around water lines that go into the trailer? Any issues I should be aware of? Thanks!
Forum Discussion
use some latex or nitrile gloves, this stuff is really sticky
wet your fingers in water and you can use your hands to tap it down if it expands to much
once it hardens..do NOT cut or trim the expanded foam
this is not closed cell, once the surface is cut this stuff will act like a sponge and absorb water, the smooth surface skin of the foam must remain intact
this is what makes it weather/water proof
wet your fingers in water and you can use your hands to tap it down if it expands to much
once it hardens..do NOT cut or trim the expanded foam
this is not closed cell, once the surface is cut this stuff will act like a sponge and absorb water, the smooth surface skin of the foam must remain intact
this is what makes it weather/water proof
