Very little trailer brakes
Got trailer brake problems....little to none. We bought a Grand Design Solitude 369RL, set brake controller to 8.5 and it felt good, I thought. After awhile I decided to set up brake controller right ...
Forum Discussion
Old-Biscuit wrote:
.054 Output????
Either poor measurement/reading (not getting good contact + & -)
Meter on wrong setting
Bad wiring/connection
OR brake controller output bad
Check brake controller output at truck receptacle'
If good keep check downstream until lost.
Using manual lever output should be close to full 12V and roughly 2.5A + at each brake magnet wiring
HERE is a good electric brake manual (by Dexter but info applies to all electric braking)
How to adjust
How to burnish new shoes
How to set up braking
Troubleshooting
Great tutorial. Much obliged. /CC
