WDH too much tension and how would you know?
I am setting up my new Toy Hauler with a Standard WDH rated at 10k. After weighing I am a little light in the front end and would like to try and transfer come more weight forward by dropping the he...
Forum Discussion
1L243 wrote:
The process you describe is the method I am using but I don't think I am going as high with the truck and trailer as you are. I thought I might be putting too much load on the 3500# jack. I am only lifting the truck and trailer 2" higher than the stock truck height. I will experiment tying to lift a little higher.
When I get my heavier bars I will redo all the measurements and reweigh...
Hi,
The 2" of lift above the stock height would be your problem. I have a 3,500 ball screw Atwood and it lifts the truck and trailer without issues. I would estimate I and 4" maybe 5" above stock height. Mine does have a slip clutch if I come to the overload point which is has never had.
Hope this helps
John
