Weight Distributing Hitch BENT
I started to notice when hitching my trailer that I was not able to get an even number of links on each of the spring bars on my WDH; I might get 6 links on one side, and 8 on the other. Couldn't figu...
Forum Discussion
JRscooby wrote:I didn't even notice those marks; good catch! Here is a closeup:
When I look at the pic I see near the small ball a mark in the bent plate. Bet if you look at tongue of trailer you will have a matching mark.
https://photos.app.goo.gl/4XqnMhpxbXwL8w9A6
There's some rust, but some parts of it look fresh. I do store it inside when not in use. Possible I got it like that, but more than likely it was me. That said, I see no mark on my hitch. I tried to line it up to see what where it might be hit...I see a rust spot on the trailer coupler that lines up, which I guess could be it. I checked the sway bar and see no marks on there either.
https://photos.app.goo.gl/iQ8BKnGwxZ3tnkJ26
JRscooby wrote:Got it - thanks
At some point cutting the trailer to the right side you jackknifed to tight...
