What grease is best for repacking
I have a AL-KO Ultrulube. It says that I need to use NLGI Grade 2 lithium complex, grease with a minimum dropping point of 400F for the repack. http://dutchmen.com/image/data/documents/parts/alkobr...
Forum Discussion
pitch wrote:
If your EZ lube is anything like mine, they did not put in a lot at the factory. I pumped grease into mine until the factory lube just started to ooze. Between the 4 hubs I used almost two full 14oz cartridges.
Thanks for the info, I'll take a look.
