What is it? (pic)

Sylvan Lake it is.

We are heading to the Black Hills during that sweet spot in July, after the July 4 rush but before the Sturgis rally traffic picks up later in the month. I have not been to Sylvan Lake in 15 years. I can't wait!

back to the OP's question, it is a tool for a Delta single handle faucet to repair the faucet. The allen wrench fits the set screw to remove the handle and the other end is a spanner to tighten or loosen the packing nut that adjusts the tension on the "Ball" to obtain a proper pressure on the O rings below the ball to prevent leaking. When you buy a repair kit for a Delta facet the same wrench is usally included in the kit.

lat471 wrote:
Thanks for posting that. I have one of those laying around also and couldn't remember what it was for.:S

X-2, and now I remember!

wny_pat wrote:

lat471 wrote:
Thanks for posting that. I have one of those laying around also and couldn't remember what it was for.:S

X-2, and now I remember!

I knew I saw one of them before, I have even used them. Taken out of the little parts bag i was stumped.

It's a lasar reflector. It is used to accurtely measure the distance from the earth to the moon.
EDIT. Sorry, I didn't realize that there were replies on the second page.

See that`s why I didn`t know what it was! Forest River uses cheap squeaky faucets. LOL. this spring I`m thinking about upgrading to better faucets though.

I thought this item:



is used to adjust the flux capacitor that powers this item:

lat471 wrote:
Thanks for posting that. I have one of those laying around also and couldn't remember what it was for.:S

I was sitting here thinking the same thing. I have one of those and couldn't remember what it was for.

I know exactly what that is... Trying to think of the brand but it's a tool for working on the kitchen faucet. The Hex key is used to remove the handle and the spanner (yes that's what the other end is called) to adjust the nylon pressure ring on the single handle kitchen (or bathroom) faucet. The bent "legs" fit in slots in the nylon ring. It came in the box with one of the faucets by the way, if you go to the hardware store they often include the same wrench with the rebuild kits as well.

DELTA.. that's the make I'm trying to think of DELTA though there are other makes that might use the same tool.

wa8yxm wrote:
I know exactly what that is... Trying to think of the brand but it's a tool for working on the kitchen faucet. The Hex key is used to remove the handle and the spanner (yes that's what the other end is called) to adjust the nylon pressure ring on the single handle kitchen (or bathroom) faucet. The bent "legs" fit in slots in the nylon ring. It came in the box with one of the faucets by the way, if you go to the hardware store they often include the same wrench with the rebuild kits as well.

DELTA.. that's the make I'm trying to think of DELTA though there are other makes that might use the same tool.

You obviously don't bother to read any of the other replies to the OP's query. :) The question was answered in about the third reply.