Where to buy good semi-cheap ratchet socket set in USA?

n7bsn wrote:

gcloss wrote:
Stick with a good brand such as Sears Craftsman tools. Harbor Freight is pure junk made in the Far East. A real waste of money.

Remember you get what you pay for ....

haven't bought any Craftsman since K-Mart bought them have you?

Yes, I just bought a set of Craftsman tools for the RV at Ace Hardware on sale.

I've given up on Craftsman hand tools. It breaks my heart. I have a set from 30 years ago, one from 14 years ago and a third set from 5 years ago (I like to have point-of-use accessibility). A few pieces were my Grandfather's, from probably 45 years ago. Their downhill slide is readily apparent.
Plus one for Lowe's Kobalt. Somewhat reasonably priced and it appears the quality is there, too. That's where I went for my last set, about a year ago. I'm not sure of an equivalent in Canada.
I understand the non-rusting, convenience and see-what's-missing-at-a-glance qualities of a molded case, but I recycle the plastic within a week of buying a new set, opting for smaller, metal, drawer-style tool boxes that separate Metric from SAE. Tool rolls or plastic dividers for wrenches, magnetic socket holders and a zippered bag for screwdrivers keeps the drawers organized and kept in place while in motion. Pliers, Crescent wrenches, Channel-locks and other large or accessory items go in the top tray/bin of the drawer tool box (directly under the hinged lid). Motor-Sports stickers look better on a metal box, too. The downside is the bulk, weight, potential for rust and dents.
Dang insomnia.

Fastfwd75 wrote:
I bought a socket set at Sears Canada a couple decades ago. It served me well but now the case plastic hinges have come apart and parts are not secure within the case.

Prices are generally better in the USA but I am not sure what is the best place to get something similar that will have a compact and durable case and not too expensive.

I need:
Metric + Imperial ratchet and socket 3/8" and 3/4" selections
Screwdriver and bits would be a plus
Most of all I want it to come well organized in a case that will last and be easy to transport.

Why not repair the box? Video

I have seen people find a generic case link cut the fitted inside out of their old one and install it in the new one.

Either way your best best bet is to find a way to repair the case.

Like others have said, Craftsman quality has slipped over the past few years. The good news is that for the average homeowner, they won't wear out or break in a lifetime. I probably have over 1000 pcs. of Craftsman in the shop boxes, also many pieces of Proto, Snap-on, Mac, and various other brands collected over the years. I used my tools to make a living so I take care of them and don't lose hardly a one. For the average guy, it doesn't work that way. They pick up a tool and, after it's use, it's thrown on the deck and possibly recovered later. When you pay $40 for an open-end Snap-on, it's done differently.

For the average RV owner, an inexpensive, molded case of the basics should suffice. For a more advanced user, a steel tool box with socket holders is an improvement. I've looked at the Kobalt line sold at Lowes and they seem to be a tad above HF and even Craftsman. I think they also have a lifetime guarantee against breakage (although who knows how that's enforced). Best sale prices on Craftsman was always around Thanksgiving until Xmas.

CavemanCharlie wrote:
I hate to say it but, a lot of Craftsman Tool production has now been moved over to China and it's quality has fallen dramatically. If you have a good older set of tools that serves your needs and the only problem is the box you will be better off to just find a new box. You have to pay good money now to find good quality tools.

Spend a lot of money on new tools or, get a new box, and keep the good tools you already have.

I will no longer buy craftsman tool now that there made in China I'm looking at kolbolt tools from lows. And yes I know there made in China too

Trackrig wrote:
Two cheap alternatives are to use a Tupperware container or Sears sell small canvas tool bags for about $10. That's a lot cheaper than buying a new set up tools just for the case.

When Sears has tool set on sale, I've bought them because that's the cheapest way to buy replacement parts sometimes - then I throw the plastic case away because it takes up too much room.

Bill

X2 - I also use the canvas tool bag from Sears. I just throw it into the truck whenever I take a trip. Last trip it was handy! For a ratchet set I enjoy my Craftsman set but I don't care for their power tools anymore (but that's another thread). As others have stated, get a better organizer for your quality tools.

I have never heard of buying a complete tool set because of needing a tool box/case. Can I have your old tools once you buy this new set?

Pretty please? :B

I inherited my Dad's Craftsman hand tool sets in 1978. They were even in Craftsman metal tool boxes. The Craftsman electric drill even has a metal housing. They're as good and accurate as the day he bought them. And I don't lend them to anyone. I do go to Harbor Freight for something special that I'll only use once or twice, so I'm rarely disappointed.
Last week, I went to Sears for a hand held jig saw. I needed to cut an inch off of a piece of plywood. The "expert" in the amazingly small tool section of the store didn't know what a jig saw was and when I found it myself and went to pay, he didn't know how to make change for a $50 bill. How the mighty have fallen.

coolbreeze01 wrote:
The Snap-On truck will have it if the others don't.

The OP was looking for "semi-cheap". Buying off the Snap-On truck is NOT! LOL

When in the US, I buy any tools I need at either Lowes or Harbor Freight.