Forum Discussion
Durb
May 21, 2023Explorer
GaryS1953 wrote:Durb wrote:
Your truck's keester is still squatting 1.5" with your weight distribution hitch set up. I would apply more tension to the bars by tilting the hitch head down and transferring more weight to your front tires. Try to get your rear measurement to 37.25". Wouldn't hurt.
The problem with air bags is that it hardens the rear suspension creating a fulcrum. Adding weight (tongue weight) far behind the rear axle creates a lever and will cause your front axle to unload. The reason your 5th wheel of almost equivalent weight didn't have the same effect is because the weight was directly over the rear axle.
I assume you weighed the truck with the trailer attached and also weighed the trailer's axles. It would be nice to know what the truck weighs without the trailer attached to help determine your tongue weight. If your axles come in at 5,980 and you have 12% tongue weight, then your trailer weighs 6,795 pounds with 815 pounds of tongue weight. Starting to get kind of heavy for a half ton truck.
I'm not sure I understand about putting tension on the bars by "tilting the hitch head down". I have a Curt 17601 weight distribution hitch with integrated sway control. I don't know how I would tilt the hitch head, but I could raise the height of the equalizing/sway bars, which obviously would put more tension on them. Is that what you meant?
Thanks, Gary
Search Curt 17601 on Google and an installation video will come up, or copy and paste this URL. (https://youtu.be/ki7Z_FtfFEY). They show how to adjust the two adjustment screws on the hitch head to tilt the bars down thus increasing spring tension.
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,178 PostsLatest Activity: Dec 02, 2025