Wore out hitch
This is different. I have a class IV hitch. The holes in the receiver tube have “wallered out” where the pin inserts to hold the stinger in. Anyone heard of a fix other than total replacement? My fir...
Forum Discussion
deltabravo wrote:
Once you fix the hole, don't use the angle hitch pin if that's what you have been using. Use a straight hitch pin.
As I stated the wear isn't just from the angled pins but from the soft metal in the hitch and the way the drawbar rests in the tube. after a while it finds its relaxed position and wont wear anymore. my Curt hitch doesn't have any wear and I`m using the same pin I did with the factory receiver that had the worn out hitch pun hole. I replaced the receiver due to rust not the wear in the pin hole.
