Forum Discussion
I_Fish_2
Sep 25, 2014Explorer
Well, it's getting deeper. I came home this evening and decided to go ahead and check and clean the terminals and grounds. Everything was good and tight, although I did clean up the grounds some. Checked voltage and have 12.8 volts. With camper plugged in, I get 13.8. So, I flip the switch and she fires right up.
Great! Well, not really. For some reason the fuse on the circuit board blows. I replace it, have the wife flip the switch, and it immediately blows another one. What's wrong to cause that? I took the terminals off one at a time, so as to not cross them up, but, I double checked by the wiring diagram in the manual, and all are right.
Where to look next?
Great! Well, not really. For some reason the fuse on the circuit board blows. I replace it, have the wife flip the switch, and it immediately blows another one. What's wrong to cause that? I took the terminals off one at a time, so as to not cross them up, but, I double checked by the wiring diagram in the manual, and all are right.
Where to look next?
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,191 PostsLatest Activity: Apr 01, 2026