dryfly wrote:
RCMAN46 wrote:
To the OP
Have the wet bolts ever taken grease?
If not then you need to remove them and find out what is wrong. When I did my wet bolts I found several bolts had not been properly drilled. Lippert replaced the bolts.
They have never taken grease. My plan has been to remove bolts as a last resort after trying several other solutions first. I will have to buy heavier jack stands if I go that route.
To those giving suggestions on grease guns, thanks.
I am almost sure you will find the bolts were not drilled correctly. If you do a search on wet bolts you will find the bolts that were not drilled properly is a common problem particularly with the Lippert bolts although I believe there are others as I suspect all of the bolts come from China.