120v Feedback from Appliance to Inverter?
Wondering if the PSW inverter can "see" what is plugged into it. Never mind between inductive and resistive--I mean between different resistive appliances. Does each appliance have its own feedb...
Forum Discussion
Hi BFL13,
No feedback per se, but when I had my 2500 VA MSW inverter I would sometimes "wake it up" with a small load before I turned on the microwave. Otherwise the input surge would occasionally cause the inverter to fault. The inverter itself caused a huge amount of RFI (both am and fm) when I would do double conversion using the PD converter. But stand alone, neither device did RFI
I took from that, that there was a pretty high input surge demand from the microwave. (oh for a fast enough meter).
No feedback per se, but when I had my 2500 VA MSW inverter I would sometimes "wake it up" with a small load before I turned on the microwave. Otherwise the input surge would occasionally cause the inverter to fault. The inverter itself caused a huge amount of RFI (both am and fm) when I would do double conversion using the PD converter. But stand alone, neither device did RFI
I took from that, that there was a pretty high input surge demand from the microwave. (oh for a fast enough meter).
