12v MPPT and 24v MPPT vs 24v PWM Test
Got a chance to try out comparing amps to the battery using MPPT vs PWM on a 24v battery bank and comparing those with the usual MPPT on 12v with my 230w panel. The bank is four 6s, so it was easy ...
Forum Discussion
full_mosey wrote:
In the summer 0f 2013, I let the magic smoke out of my MS SS 10 PWM controller. Within a week, I had installed an MS MPPT 15.
I rewired the two 85W panels to series.
The maximum I ever observed from the PWM was a little over 9A. Almost immediately, I observed over 10A with MPPT. That is about an 11% increase.
I believe I get more daily AHs now with MPPT.
HTH;
John
Last summer in MI saw 10.5 amps many times out of my ss-10 pwm with two 80 panels in parallel during bulk mode. Measured it with a Sears Clamp on AC/DC amp meter
